The
current version
of LP-Rotor is 2.1.0. See note below if you are upgrading from a
previous
version.
Download file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Rotor will be installed into the
Program
Files\LP-Rotor directory and added to the Start menu if you use
the
defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Monitor will be installed into the
Program Files\LP-Monitor directory and added to the Start menu if
you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Relays will be installed into the
Program
Files\LP-Relays directory and added to the Start menu if you use
the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Relays16 will be installed into the
Program Files\LP-Relays16 directory and added to the Start menu
if
you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
This
is a new version
that provides support for non-Kenwood radios, while keeping expanded
support
for Kenwoods.
Download file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Meters 1.1 will be installed into the
Program Files\LP-Meters directory and added to the Start menu if
you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-StepLink 1.2 will be installed into
the Program Files\LP_StepLink directory and added to the Start
menu
if you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
This is a folder which
contains EZNEC model
files for 5 element SteppIR models and for stacked 3 element SteppIR
models.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Monitor16 will be installed into the
Program Files\LP-Monitor16 directory and added to the Start menu
if you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
Warning: This program only works if you
have the firmware released in September 2005 installed in your
controller. It adds serial port control of Home and Calibrate to the
controller. The supported versions are 3A01, 3A02, 3A03 and 3A04 for
regular SteppIR beams...
and 6104 for the MonstIR. Note: 6104 does not provide power switch
memory.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
SteppIR-VCP will be installed into the
Program Files\SteppIR-VCP directory and added to the Start menu
if
you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Footswitch 1.1.0 will be installed
into the Program Files\LP-FootSwitch directory and added to the Start
menu
if you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove
Programs in the Windows Control Panel.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Footswitch2 will be installed into
the Program Files\LP-FootSwitch2 directory and added to the Start
menu
if you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove
Programs in the Windows Control Panel.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Status will be installed into the
Program
Files\LP-Status directory and added to the Start menu if you use
the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove
Programs in the Windows Control Panel.