The VCP software has been moved to LP-100 Updates page.
The
current version
of LP-Rotor is 2.1.2. See note below if you are upgrading from a
previous
version.
Download file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Rotor will be installed into the
Program
Files\LP-Rotor directory and added to the Start menu if you use
the
defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Monitor will be installed into the
Program Files\LP-Monitor directory and added to the Start menu if
you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
Download file into temp directory, unzip into a convenient permanent directory and run the Setup.exe program. LP-Relays will be installed into the Program Files\LP-Relays directory and added to the Start menu if you use the defaults. NOTE: If you are installing a newer version on a machine with an older version, remove the old version first using the Add/Remove Programs in the Windows Control Panel.
Download file into temp directory, unzip into a convenient permanent directory and run the Setup.exe program. LP-Relays16 will be installed into the Program Files\LP-Relays16 directory and added to the Start menu if you use the defaults. NOTE: If you are installing a newer version on a machine with an older version, remove the old version first using the Add/Remove Programs in the Windows Control Panel.
This
is a new version
that provides support for non-Kenwood radios, while keeping expanded
support
for Kenwoods.
Download file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Meters 1.1 will be installed into the
Program Files\LP-Meters directory and added to the Start menu if
you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-StepLink 1.2 will be installed into
the Program Files\LP_StepLink directory and added to the Start
menu
if you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
This
is a folder which
contains EZNEC model
files for 5 element SteppIR models and for stacked 3 element SteppIR
models.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Monitor16 will be installed into the
Program Files\LP-Monitor16 directory and added to the Start menu
if you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove Programs in the Windows
Control Panel.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Footswitch 1.1.0 will be installed
into the Program Files\LP-FootSwitch directory and added to the Start
menu
if you use the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove
Programs in the Windows Control Panel.
Download file into temp directory, unzip into a convenient permanent directory and run the Setup.exe program. LP-Footswitch2 will be installed into the Program Files\LP-FootSwitch2 directory and added to the Start menu if you use the defaults. NOTE: If you are installing a newer version on a machine with an older version, remove the old version first using the Add/Remove Programs in the Windows Control Panel.
Download
file into
temp directory, unzip into a convenient permanent directory and
run the Setup.exe program.
LP-Status will be installed into the
Program
Files\LP-Status directory and added to the Start menu if you use
the defaults.
NOTE: If you are installing a newer
version
on a machine with an older version, remove the old version first using
the Add/Remove
Programs in the Windows Control Panel.